Omnipro installation manual

Setting a flag to a value does not generate an event even if the value changes from zero to nonzero or vice versa.

It cancels any timer. Buttons do not have state; they are simply "activated". A button activation is an event. Buttons can be activated from a console, the telephone menu function 3 , or in program commands. In the OmniPro II there are buttons. Use buttons if you want the user to be able to initiate a command from the console or telephone and there isn't an appropriate zone for this.

The text of a message is its name, which can be up to 15 characters. Receipt of a message on a serial port configured for Pro-Link generates an event. In the OmniPro II there are messages. Each message has a binary flag that says whether it is displayed on the console.

Show Message and Clear Message control this flag. The complete list of events is: Zones becoming Secure or Not Ready. Any central station with modern equipment can receive these formats. Do not mix code lengths! The Installer Setup mode is used to configure the general operation of the system, the Outputs, the Areas, the Zone Types, the Digital Communicator, and various other settings.

Each Wireless Receiver can handle up to 64 wireless zones, in groups of The number of areas must be specified. Also, consoles, zones, units, thermostats, and buttons must be assigned to areas. By default, the system is setup for one area.

Each zone must be assigned to one and only one area. Buttons can be configured so that they can only be activated from a particular area or from any area. Thermostats can be set up so that they can only be controlled from a specific area or from all areas. If thermostats are used, they must be configured to the applicable thermostat type.

The PC Access code cannot arm and disarm the system. The default setting is 0 NO disabled. This item adjusts the threshold that is used to determine when the phone line goes dead. Page Clock Adjustment The default setting is All programs, names, and setup items will be reset.

All system RAM will also be initialized and the system will restart. There are global zone options that affect all zones and there are individual zone options that affect how each individual zone functions. CP is a standard sponsored by the Security Industry Association SIA designed with features for security systems and associated arming and disarming devices intended to reduce the incidence of false alarms.

Console: approx. Refer to UL for installation requirements. Ceiling mounted smoke detectors should be located in the center of the room or hall, or not less than 4 inches from any wall. When the detector is mounted on a wall, the top of the detector should be 4 to 12 inches from the ceiling.

Print page 1 Print document 76 pages. Rename the bookmark. Delete bookmark? In the event that the controller is found defective, the controller board can be removed without disconnecting the entire wiring from their terminals.

When the system is disarmed by user code , the communicator can call the central station and report that the system was disarmed opened with the user code that was used. The Installer Setup mode is used to configure the general operation of the system, the Outputs, the Areas, the Zone Types, the Digital Communicator, and various other settings.

Each Wireless Receiver can handle up to 64 wireless zones, in groups of Page Zone Types To change a zone type, press the ' ' key, then use the arrow keys to scroll through the list of zone types. If this zone is accidentally tripped, you will not know that the OmniPro II is making a silent dial out, and hence won't know to stop it.

To stop a silent dial out once it has started, you must go to the console and press OFF then enter your code. The number of areas must be specified. Also, consoles, zones, units, thermostats, and buttons must be assigned to areas. By default, the system is setup for one area. Each zone must be assigned to one and only one area.

Buttons can be configured so that they can only be activated from a particular area or from any area. Thermostats can be set up so that they can only be controlled from a specific area or from all areas.

If thermostats are used, they must be configured to the applicable thermostat type. Page Setup Miscellaneous Remember this Installer code and do not disable. There is no way to reset or retrieve the code! If the code is forgotten or disabled, the OmniPro II controller must be sent back to the factory. Call for an RA. Page Supervise Int Sndr This unit includes an alarm verification feature that will result in a delay of the system fire alarm signal from the initiating circuit.

The total delay OmniPro II controller plus detector delay shall not exceed 60 seconds. No other initiating devices shall be connected to these circuits unless approved by the local authority having jurisdiction. To turn it back On, press 1 then ' '. If a Serial Interface Module is installed, select its baud rate then press the ' ' key.